Logotip tvrtke Automatsko navodnjavanje - specijalisti za sustave automatskog navodnjavanja, hortikulturu, vrtnu rasvjetu i svime što je potrebno za savršen vrt
Logotip Rain Bird opreme za sustave automatskog navodnjavanja vrtova.
+385 95 5758 324

FUSION WELDING

PE fusion welding for permanent, secure joints

We carry out professional fusion welding of PE pipes for irrigation systems, water-supply installations and other pressurised systems.

Professional equipment

100% watertight joints

Long service life

For all PE installations

Process & Features

Precizno rezanje i priprema cijevi za sustave navodnjavanja prema tehničkoj dokumentaciji projekta.

PIPE PREPARATIO

Every PE pipe is precisely cut, cleaned and prepared to ensure a fully correct, long-lasting joint.

Precizno rezanje i priprema cijevi za sustave navodnjavanja prema tehničkoj dokumentaciji projekta.

PROFESSIONAL HEATING

We use specialised equipment to heat the pipe ends to the optimal temperature, in line with manufacturer standards.

Strojno fuzio sučelno varenje polietilenskih cijevi velikog promjera za vodovodne sustave po cijeloj Hrvatskoj.

PRECISE JOINING

Joints are made under controlled pressure to create a homogeneous bond with no weak points.

Provjera instalacija i kontrola ugradnje cijevi sustava za zalijevanje u iskopane kanale, Istra i Dalmacija.

QUALITY CONTROL

We visually inspect and check every joint before it's backfilled.

Sustav za automatsko navodnjavanje okućnice s pop-up prskalicama za održavanje zelenog travnjaka, okolica Zagreba.

LONG-TERM RELIABILITY

Correctly executed fusion welding provides decades of leak-free operation with no need for extra repairs.

Sustav automatskog navodnjavanja s pop-up raspršivačima na zelenom travnjaku u Sesvetama.

INDIVIDUALNI PRISTUP

Vaš vrt zaslužuje jedinstveno rješenje

Naš posao ne svodi se samo na postavljanje prskalica i cijevi. Svakom projektu pristupamo individualno, s puno pažnje i iskustva, jer znamo da svaki vrt ima svoje posebnosti. Bilo da se radi o travnjaku, vrtnim gredicama, živicama ili zahtjevnim terenima, cilj nam je izraditi sustav koji će raditi pouzdano, ravnomjerno i dugoročno bez problema.

Projektiranje sustava započinjemo izlaskom na teren i detaljnom analizom prostora, tlaka vode i potreba biljaka. Nakon planiranja slijedi precizna i uredna izvedba uz minimalno oštećenje postojećeg travnjaka i vrta. Posebnu pažnju posvećujemo detaljima, urednosti tijekom radova i kvaliteti izvedbe, jer vjerujemo da profesionalnost mora biti vidljiva u svakom dijelu posla.

Koristimo provjerenu profesionalnu opremu renomiranih proizvođača kako bismo osigurali dugotrajan i kvalitetan rad sustava tijekom cijele godine. Ugrađujemo rasprskivače, kap na kap sustave, elektroventile, upravljačke jedinice, WiFi kontrole i senzore kiše koji omogućuju potpuno automatizirano i jednostavno upravljanje navodnjavanjem.

Naša usluga ne završava ugradnjom sustava. Klijentima pružamo kompletnu podršku, održavanje i servis kako bi navodnjavanje uvijek radilo besprijekorno i učinkovito.

EXPERT WORKMANSHIP

Professional PE fusion welding for maximum installation safety

Fusion welding is the safest way to join polyethylene (PE) pipes. Unlike mechanical fittings, this process creates a homogeneous joint that becomes an integral part of the pipe itself, achieving exceptional strength and complete watertightness.

Our expert team uses professional electrofusion and butt-fusion welding equipment for PE pipes, depending on the type of installation and pipe diameter. Every joint is made according to industry standards, ensuring long-term operation with no leaks, pressure loss, or need for later intervention.

Whether it’s an irrigation system, water-supply installation or another pressurised system, we guarantee precise execution and quality that lasts for decades.

How we build your secure system

A quality joint starts with proper preparation and ends with precise inspection.

PROFESSIONAL EQUIPMENT

We use certified PE fusion welding equipment that enables controlled heating and fully correct joining of pipes of all sizes.

EXPERIENCED TECHNICIANS

Our team has extensive experience in installing PE systems, and every joint is made to industry standards to ensure maximum system safety.

WORRY-FREE FOR YEARS TO COME

A properly executed joint requires no additional maintenance and does not become a weak point in the installation. The system remains safe and reliable for many years of use.

Galerija

FAQ — Frequently Asked Questions

Fusion welding is a process for joining plastic (polyethylene) pipes using specialised machines. The device melts the ends of the pipes and fittings with precisely controlled heat. As the material cools, the pipes fuse into a single, homogeneous body. There's no glue, rubber seals or threads — the joint literally becomes an inseparable part of the pipe itself.
With standard compression (mechanical) fittings, there's always a risk of failure due to ground movement, freezing, ageing rubber seals, or pressure changes in the network (water hammer). Such failures lead to water loss. Fusion-welded joints are 100% watertight, withstand very high pressures, and completely eliminate the risk of hidden underground failures.
Since a fusion joint achieves a strength equal to, and often greater than, the pipe itself, its service life matches that of the pipe network. Under standard underground installation conditions, this provides reliability and durability of 50 years or more, with no need for any maintenance.
We apply this technique at all critical points: on the main supply lines of an irrigation system, connections to the municipal water network, and in any situation where pipes are laid deep in the ground — particularly beneath paving, asphalt, concrete paths or terraces. At these locations, it's essential to avoid later repairs that would require breaking up the surface.
Absolutely. The polyethylene (PE) pipes and electrofusion fittings we use are high-quality, environmentally friendly and strictly certified for drinking-water transport. The welding process itself uses no chemicals, pastes or solvents — only heat — fully preserving the health safety and purity of your water.

Problemi kod neprofesionalnog navodnjavanja

Loše izveden sustav navodnjavanja vrlo brzo može stvoriti dodatne troškove, probleme s travnjakom i nepotrebno trošenje vode. Nepravilno projektirane zone, loše postavljene prskalice, problemi s tlakom vode ili nekvalitetna izvedba često uzrokuju neravnomjerno zalijevanje, curenje instalacija i otežano održavanje sustava.

Zato je profesionalno projektiranje i kvalitetna izvedba izuzetno važna. Ispravno izveden sustav znači zdrav travnjak, dugotrajan rad instalacija, manju potrošnju vode i manje kvarova tijekom godina korištenja.

Provjera rada pop-up prskalice za travu i podešavanje optimalnog radnog tlaka u Karlovcu.

Gubitak pritiska

Loše dimenzionirane cijevi rezultiraju neujednaćenim zalijevanjem i suhim zonama koje uništavaju estetiku.

Shematski prikaz utjecaja nepravilnog zalijevanja na korijenski sustav biljke i truljenje korijena.

Propadanje korijena

Bez senzora i preciznih zona, biljke mogu doslovno 'utonuti" u vodi, što dovodi do truljenja.

Primjer dotrajalih i oštećenih cijevi koje zahtijevaju stručni servis i nadogradnju sustava.

Kratak vijek trajanja

Jeftine komponente ne izdrže ni dvije sezone rada u ekstremnim ljetnim uvjetima.

Let's start your project today

Whether you’re looking to upgrade your irrigation or need a complete horticultural solution, our engineering team is ready to help.

Free Consultation
+385 95 5758 324